Commercial plumbing
Jetting building drains in Burlington
Cabling opens a path through a blockage. Water at high pressure cleans the pipe from wall to wall. For buildings where the same drain keeps backing up, jetting is usually what finally clears the line.
- Booked around your opening hours
- Smallest possible shut-off
- Written summary for owner or manager
- One number for every property
Calls only · a person answers
- 24 hResponse
- 28 areasAreas
- 28 servicesServices
- Licensed & insuredTrust
When jetting is the right tool
- Kitchen lines coated in hardened grease from years of service.
- Floor drains in garages and loading areas filled with silt and grit.
- Building mains that clog every few months even after cabling.
- Storm lines and catch basins carrying leaves and sand.
What's included
- Jetter with grease and flushing nozzles
- Push camera with recorder for reports
- Flush valve and sensor tap rebuild kits
- Backflow test kit and repair kits
How we jet a line
- Camera the line first so we know the pipe material, size and condition.
- Choose the nozzle to suit: forward-firing for a plug, spinning for fat buildup, rear-jet flushing for sand and silt.
- Feed the hose upstream from a cleanout and pull it back slowly, scouring as it comes.
- Put the camera back in so you see the cleaned pipe on screen.
Tell-tale signs
- The same drain backs up every few months
- Washroom fixtures running on or not flushing
- A municipal letter about testing or grease
- Tenants reporting water in more than one unit
What we check before using pressure
Older cast iron with thin walls, clay joints that have shifted, or pipe with known cracks needs care, and the camera tells us whether jetting is safe. Where a section is broken, we recommend spot repair or lining rather than blasting water through it. Inside occupied buildings we cap nearby fixtures and floor drains so nothing sprays back into a washroom or dining room.
- Pipe sizes from small kitchen branches to building mains.
- Cold-water jetting with nozzles matched to the line.
- Video before and after for your maintenance file.
Job at a glance
- Work
- Jetting building drains
- Trade
- Commercial plumbing
- Where
- Burlington and nearby
- Book
- (365) 464-5184
Setting a maintenance schedule
Restaurants and buildings with recurring backups often book jetting on a regular cycle rather than waiting for an emergency. We note how much buildup came out each visit and adjust the interval to suit. Call (365) 464-5184 to book.
How the visit runs
- 1
Agree on a time that suits your opening hours.
- 2
Isolate the smallest section we can.
- 3
Do the work, then test under real use.
- 4
Send a short written summary for your file.
Questions we hear
Is jetting safe for old pipes?
Often yes, but not always. We camera the line first; if the pipe is cracked or badly corroded we suggest repair before using high pressure.
How is jetting different from snaking?
Cabling drills through the plug only. Jetting strips grease and scale off the entire inside surface, so the clog has nothing left to rebuild on.