Service area
Plumbing in Kilbride
Kilbride is a small rural settlement in north Burlington, above the Escarpment around Guelph Line and Kilbride Street, surrounded by farms and forest.
- A plumber routed to your street in Kilbride
- Drains, leaks, water heaters and basements
- Familiar with the pipes in these houses
- The plan explained before any work
Calls only · a person answers
- 24 hResponse
- 28 areasAreas
- 28 servicesServices
- Licensed & insuredTrust
The houses of Kilbride
Homes range from century farmhouses to modern estate houses on large country lots. Most are not on municipal water or sewer. They rely on a private well, a pressure tank and a septic system. That changes the plumbing completely: the water source, the pressure and the waste disposal are all the owner's responsibility.
Many homes also have water treatment such as softeners, iron filters or UV systems.
Area at a glance
- Area
- Kilbride
- Municipality
- Rural Burlington
- Water
- Private wells and septic common
- Call
- (365) 464-5184
Common plumbing problems here
- Pressure tanks: waterlogged tanks making the pump start and stop over and over.
- Well pumps: loss of water when a pump or switch fails.
- Hard water: heavy scale. See water softener installation.
- Septic lines: blockages between house and tank.
Worth checking here
- Floor drain flows and has a cover
- Sump pump starts when the float lifts
- Water heater age on the rating plate
- Hose bib shut-off closed before frost
Water, drains and basements
Well water should be tested regularly; Halton Region and Public Health Ontario have offered free bacteriological testing for private well owners. Check current availability. Septic tanks need regular pumping. Our wells and septic guide explains the basics.
Winters above the Escarpment are colder, so pipes in exterior walls and pump houses need protection.
Find your main shut-off
In most houses here the water enters at the street-side foundation wall, with the meter and main valve together. Tag that valve before you need it.
A typical well system
Water is pumped from a drilled well by a submersible pump, usually through a pitless adapter below frost depth, into a pressure tank in the basement. A switch starts the pump once pressure falls to its cut-in and off when it builds back up. From there, water may go through a sediment filter, a softener or iron filter and a UV light before reaching the house.
- Pump cycling every few seconds: pressure tank lost its air charge.
- No water at all: pump, switch, breaker or wiring.
- Sputtering taps: air in the line or low water in the well.
- Orange stains: iron in the water.
Septic systems carry waste to a tank where solids settle, then to a leaching bed. Tanks need pumping before solids reach the outlet. Slow drains throughout the house can mean the tank is full or the line to it is blocked. We clear house-to-tank lines and can camera them; septic tank pumping and bed work belong to septic contractors.
Because Kilbride sits above the Escarpment, winter winds are harder on exposed pipes. Insulating crawlspaces and pump houses saves a lot of trouble.
Getting us there
We reach Kilbride via Guelph Line or Appleby Line north of Highway 407. Let us know about long driveways or gates when you call.
Questions we hear
Will you service my well equipment? We look after the plumbing side, pressure tanks and switches. Some well work needs a licensed well contractor.
How often should a septic be pumped?
Commonly every three to five years, more often for a big household. Check with your septic professional.